I Should have a .......
 

brake job and master cylinder brace install write-up posted after this weekend.

That is all.

Re: I Should have a .......
 

what are you all doing in your brake job?

Re: I Should have a .......
 

Sweet! A new writeup!

Re: I Should have a .......
 

I'll be installing Brembo rotorz, new pads, SS lines, and a mbc brace. Then a full 5-point bleed job after flushing thru new fluid. I'm doing it on someone elses Z.

I have my BBK parts finally picked out for my car. Just waiting to need new brakes before I buy the parts. :cheers:

Re: I Should have a .......
 

its not BBK, it is BMFBK. anyways, sounds like fun, i will be waiting for the write-up because i have never read how to change to SS lines.

Re: I Should have a .......
 

Wrong, it's BAMFBK :spin:

Re: I Should have a .......
 

I woulda said that If I were going with 14" rotorz. I'm only going with 12.8" tho.

Re: I Should have a .......
 

My TT will be getting the Wilwood BMFBK with 14" rotors.... :) Best bang for buck IMO. The Brembo BBK (14" rotors) is insanely expensive, and only available for the front wheels.... :( The wilwood has a kit for all 4 corners, at half the price brembo charges for just the fronts.

Re: I Should have a .......
 

Yeah, I'm going with the Wilwood 4-pots that will work on up to 13" rotors. I'm debating between the Stoptech 2-pc 350z rotorz and Wilwoods. Do you know the part numbers for the Wilwood hats that fit our cars?

Here are the calipers I'm gonna get --->>> CALIPER
I'll make my own adapters. :D

Re: I Should have a .......
 

Gotta check that out first. My friend told me to stick with Stoptech 2-pc 350z rotorz. I am not that familiar with this stuff.