Zmods.org Forums - Stillen GTZ lip install

Page 3 of 3

Show 40 posts from this thread on one page

Zmods.org Forums (https://www.zmods.org/forums/index.php)

- General Z Discussion (https://www.zmods.org/forums/forumdisplay.php?f=12)

- - Stillen GTZ lip install (https://www.zmods.org/forums/showthread.php?t=185)

baronbrady

09-03-2007 02:25 AM

Re: Stillen GTZ lip install

Specifically, is it normal for the lip to extend that far back from the front of the car? And do you think I can maybe do some kind of repair work to make it fit in the new lip?

BarryzNJ

11-09-2007 01:13 AM

Re: Stillen GTZ lip install

Quote:

Originally Posted by baronbrady

Specifically, is it normal for the lip to extend that far back from the front of the car? And do you think I can maybe do some kind of repair work to make it fit in the new lip?

That piece that extends back under the car is the splash shield, it is not part of the fascia but attaches to it with screws. McLarenF1Kid is missing his.

I think you will be able to repair your original fascia enough that the Stillen lip will attach without issue, and the repair won't need to be pretty because the Stillen lip will cover it.

tnkrstoyco

11-09-2007 01:25 PM

Re: Stillen GTZ lip install

Welcome to zmods Barry.

drewtiss

04-22-2009 01:53 AM

Re: Stillen GTZ lip install

Quote:

Originally Posted by My Fairlady Z

3M tape is what they supplied me with to put my spoiler on.

Other than the 2 bolts that go into the stock 3rd brake light mounting place from auto parts dealer.

3M tape? Are you sure? I am also planning to place my order for a nice Stillen GTZ front lip.

All times are GMT -4. The time now is 05:04 PM.

Page 3 of 3

Show 40 posts from this thread on one page